71
INSTALLATION
Place the hob face down on a
table. Remove the backing paper
and affix the sealing gasket all
round the perimeter (fig.1).
When the plate comes with no
frame, first stick on the shaped
strips as per plan and then stick
on the straight strips in a close fit
with the others (fig.2).
1
2
Cut out a piece of the worktop following
the instructions on the template that
comes with the hob.
“X” type apparatus for degree of fire
protection.
Minimum distance between hole and
wall 100 m/m.
NOTE: DO NOT USE NON-REMOVABLE ELEMENTS WITH SILICONE.
MODEL: 75cm.
fig.1
fig.2
