EN
Translation of original instructions.
Page 26 of 42
EMPTY TANKS
(T1/T2/T3)
This warning is displayed when Tank Tx is active in a fill cycle and the input “Min level Tank x"
has been activated.
The machine stops filling from Tx and switches to filling normally with cold water. Buzzer is
activated for 10 seconds. The warning disappears on pressing OK or after a certain time interval.
NO COMMUNICATION
WITH WEIGHING KIT
This warning is displayed if, on activating the weighing kit or making a calibration, the auxiliary
card is connected and operating correctly, but it is not possible to communicate with the
weighing appliance.
It is not possible to activate the kit or make the calibration.
CALIBRATION OF
WEIGHING KIT
–
ENSURE MACHINE IS
EMPTY
This warning is displayed on launching a calibration of the weighing kit, in order to inform the
user that the machine must be empty, with no additional weights on top, etc., before launching a
calibration.
None. Warning is for information only. “OK” button to hide warning and launch calibration.
CALIBRATION OF
WEIGHING KIT
–
PROCESS UNDER
WAY
This warning is displayed while the weighing kit calibration is in process.
None. Warning is for information only. There is no button and the text is displayed for 5 seconds
while the calibration is in process.
CALIBRATION OF
WEIGHING KIT
–
CALIBRATION ERROR
This warning is displayed when, on completion of the calibration process, it has not been
possible to set the weighing system to zero correctly.
None. Warning is for information only. “OK” button to hide warning.
CALIBRATION OF
WEIGHING KIT
–
CALIBRATION
REQUIRED
This warning is displayed when, on pressing “Start” to run a wash programme, a weight 3 Kg
less or 10 Kg more than the nominal weight is measured.
The 2 options "Cancel" or "OK" are displayed. Press “OK” to continue with the programme with
the nominal weight. Press “Cancel” to abort the programme.
EASY LOAD
– LAUNCH
PROCESS
This warning is displayed on pressing the Easy Load button on the main screen. The user will be
told to insert the laundry and close the door and then asked if they wish to launch the Easy Load
cycle.
The 2 options "Cancel" or "OK" are displayed.
Press “Cancel” to abort the Easy Load cycle and
return to the selection screen. Press “OK” to launch the Easy Load cycle.
EASY LOAD
– CYCLE
RUNNING
This warning is displayed while the Easy Load cycle is running, advising the user that it is in
process.
No buttons are available. Message is solely for information; the user can do nothing except wait
for the cycle to end.
