User instructions
GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT
MAINTENANCE:
•
The filters should be cleaned
under running water
using a stiff
brush.
•
It is essential to
thoroughly clean the filters
according to the
above instructions: the dishwasher cannot function if the filters are
clogged.
•
Carefully replace
the filters in their seats, to avoid damaging the
wash pump.
PROLONGED DISUSE:
•
Run the soak program twice in succession.
•
Unplug
the power cord from the socket.
•
Leave the door slightly open
, in order to prevent the formation of
unpleasant odours inside the washing tank.
•
Fill the rinse aid dispenser
.
•
Shut off the water supply tap.
BEFORE STARTING THE DISHWASHER AFTER PROLONGED
DISUSE:
•
Check that there are no deposits of sludge or rust inside the water
pipe: if there are, allow the water to run from the water supply tap for
a few minutes.
•
Plug the power cord
back into the socket.
•
Reconnect the water intake hose and open the tap again.
TROUBLESHOOTING MINOR PROBLEMS
In some cases it is possible to remedy minor problems by referring to the
following instructions:
If the program fails to start, check that:
•
the dishwasher is connected to the electrical power supply;
•
there is no power failure;
•
the water tap is open;
•
the dishwasher door is properly closed.
If water remains inside the dishwasher, check that:
•
the drain hose is not kinked;
•
the drain siphon is not obstructed;
•
the dishwasher filters are not clogged.
