English
57
CLOCK TIME
WATER HARDNESS
Adjust the hour on the
clock.
Action
Message on display
Adjust the minutes.
Validate the hour.
Press the selector dial.
Turn the selector dial.
Turn the selector dial.
Validate the minutes.
Press the selector dial.
Before starting up the dishwasher, you will need to know the water hardness in
your area.
You can find this out by either:
1º Consulting the local Water Board,
2º consulting the T.A.S. (Technical Assistance Service), or
3º using the Aquadur strip included in the accessories bag,
following the instructions
below.
Water hardness adjustment.
Water contains scale. The more scale, the harder the
water. To prevent the scale in the water from damaging the dishwasher, it is equipped
with a descaler to reduce the scale and leave it perfectly clean for washing. The descaler
uses salt to function.
To find out the water hardness:
Place the strip in a glass of
water for one second, and
then take it out.
Shake it and wait for one
minute.
The strip will show the water
hardness. Check the result
of the test against the table
below. You will probably need
to adjust your dishwasher.
a
b
a
c
c
1 sec.
b
1 min.
hora reloj 11:30
hora reloj 10:00
hora reloj 11:00
