4.5.2
Gas Fry-top with thermostatic valve
1.
Disconnect the gas supply to the appliance if connected (Any change to the conditions of the
gas circuit must be carried out by an AUTHORISED TECHNICIAN).
2.
Burner conversión:
a.
Remove the burner injectors and replace with the correct model according to the gas to
be used (table 3).
b.
Set the air control to position H (table 3) depending on the gas to be used.
3.
Pilot conversión:
a.
Release the ignition pipe.
b.
Undo the pilot unit.
c.
Remove the pilot injectors and replace with the correct model according to the gas to be
used (table 3).
d.
Replace the pilot unit and the ignition pipe.
R
air
Summary of Contents for Kore 700 Series
Page 92: ...92 ...
