42
OPERATION
Using the hob equipped with igniter knobs
(
"
Zp
" model
)
●
push down the knob of a selected burner
until you feel resistance and turn left to the
"large flame"position
●
hold the knob until gas ignites
● once flame ignites, release the knob and
adjust flame size.
Using the hob equipped with a flame-
failure cut-off device (
"
Zt
" model)
In hobs equipped with a flame-failure
cut-off device, hold the pushed down
knob in the "large flame" position for
approximately 10 seconds to activate
the a flame-failure device
.
Repeat the above step if flame does
not ignite.
If flame is extinguished, the flame-
failure device will cut off gas supply
within about 60 seconds.
You can open and control the gas
supply to the burners using knobs
with flame-failure cut-off device (Zt
models).
Summary of Contents for IO-HOB-0992
Page 48: ......
