Fagor Ingenious, Quick Installation Manual

Page: 9 / 128

9
Ignoring the above-mentioned advice places the responsibility for any personal
or material risk entirely with the customer.
IMPORTANT
Electrical Installation:
Install your refrigerator to the closest outlet. The use of
extension cord is not recommended.
Where possible, avoid connecting other electrical appliances to
the same outlet as your refrigerator while it’s in use. This will
prevent fluctuations in voltage and overheating of the
refrigerator.
To connect and disconnect your refrigerator, take the cord by the
plug and remove it. Never pull on the cable.
Your refrigerator comes equipped with a type “Y” polarised
power cord, which includes a grounding cable. Do not remove
the ground prong by using a two-prong adaptor, or cut the cable
to replace the original plug for a two-prong plug.
If you live in a region where there are voltage and frequency
variations, don’t connect your refrigerator into the outlet. You
must install an automatic voltage regulator with a minimum
power of 500 Watts for 1000 Watts. Make sure the regulator can
handle your region’s variations in tension.
1.
2.
3.
4.
5.
If the supply cord is damaged, it must be replaced by the manufac-
turer, its service agent or similarly qualified persons in order to
avoid a hazard.
6.
9
Ignoring the above-mentioned advice places the responsibility for any personal
or material risk entirely with the customer.
IMPORTANT
Electrical Installation:
Install your refrigerator to the closest outlet. The use of
extension cord is not recommended.
Where possible, avoid connecting other electrical appliances to
the same outlet as your refrigerator while it’s in use. This will
prevent fluctuations in voltage and overheating of the
refrigerator.
To connect and disconnect your refrigerator, take the cord by the
plug and remove it. Never pull on the cable.
Your refrigerator comes equipped with a type “Y” polarised
power cord, which includes a grounding cable. Do not remove
the ground prong by using a two-prong adaptor, or cut the cable
to replace the original plug for a two-prong plug.
If you live in a region where there are voltage and frequency
variations, don’t connect your refrigerator into the outlet. You
must install an automatic voltage regulator with a minimum
power of 500 Watts for 1000 Watts. Make sure the regulator can
handle your region’s variations in tension. 1.
2.
3.
4.
5.
If the supply cord is damaged, it must be replaced by the manufac-
turer, its service agent or similarly qualified persons in order to
avoid a hazard.
6.