23
22
6 / REGULAR MAINTENANCE
6 / REGULAR MAINTENANCE
Fig. 27
Fig. 28
Fig. 29
Fig. 30
Important :
The condenser must be cleaned twice a
month.
Important :
Unplug the power cable from the socket
before cleaning the condenser.
— Open the grill at the front of the appliance.
— Release the condenser
(Fig. 27)
.
— Remove it carefully
(Fig. 28)
.
— Remove any fluff from the condenser.
— Clean it with water only under the tap
(Fig. 29)
.
— After cleaning, ensure that none of the tubes are
“blocked” and that the fins are clean.
— Rub it superficially.
— Re-insert the condenser and lock it in place. Close
the grill.
Important :
When refitting the condenser, ensure that it
is pushed in firmly right to the back of its housing
when locking it in.
• CLEANING THE CONDENSER
Advice :
To clean the control panel, the access to the
drum and the casing, use only a sponge or a damp
cloth and some soapy water.
— Ensure that there is no fluff accumulating round
the dryer.
— Clean the door seal with a damp cloth.
— Clean the filter housing with your vacuum cleaner
once a year.
You should n
no
ott u
us
se
e,, under any circumstances
(Fig.
30)
:
— Abrasive powders
— Metal or plastic sponges
— Alcohol-based products (alcohol, thinners, etc.).
• CLEANING THE APPLIANCE
90 cm maxi
Fig. 24
Fig. 22
Fig. 23
To avoid having to empty the collection tank every
time you use the appliance, you have a kit (*) for
removing the water from the condenser directly into
the drain (hose and deflector). To fit this :
— Take off the existing pipe and push it inside the
appliance
(Fig. 22).
— Clip the deflector with the top of the pump
(Fig. 23).
— Connect the hose from the kit to the end connec-
tor on the appliance
(Fig. 24).
You can connect the other end of the hose either :
- To a ventilated trap
(Fig. 25)
.
- Or a sink trap
(Fig. 26
).
When connecting to a trap, you must remove the fil-
ler plug. Then press home the rubber tip. If neces-
sary, add a clamp connection
(Fig. 26)
.
Important :
The deflector must necessarily be positioned
before the drain hose connection to avoid any
water splashes when taking off the hose.
Remarks :
Directly emptying the condenser water into
the sewage system will prevent the reuse of the
recovery water for steam programs.
Fig. 26
Fig. 25
• DIRECT EVACUATION OF WATER CONDENSER
Déflecteur
Encart
Tuyau
Remarks :
(*) This kit is provided with the appliance
or is available near your After-sales service
under the ref. 57X3184 (according to model).
Deflector
Hose
Insert
