At the rear of the appliance,
unscrew the pipe bracket.
Remove the pipe from the nozzle
and leave it hanging where it is.
The drainage pipe is in the top
basket inside the appliance. First
of all, fit the pipe to the drain and
then to the nozzle. Fasten the
bracket.
There should be a fixed water
outlet drain at a distance of
between 25 and 100 cm from
the floor.
Make sure that the drainage pipe
is not bent or squashed.
a
This container must be emptied after
each drying cycle.
Collection of the water in the removable container in the appliance:
If the appliance is not connected to the home drains, the water will automatically be collected
in a removable container in the bottom drawer at the front of the appliance.
b
The
Driron
has a
condensation system
that extracts
the humidity
from the clothes during the
drying process. This humidity is turned into water.
There are two types of installation: drainage to the mains or collection of the water in the removable
container in the appliance.
Connection to the drain system:
If the appliance is located such that it can be connected to mains drainage, the condensated
water will be discharged to mains drainage. Proceed as follows:
c
d
– 60 –
a
b
d
b1
c
min.
25 cm
max.
100 cm
4
CONNECTION TO MAINS DRAINAGE
Make sure that the bend pipe of the drainage pipe
is securely fitted to the outlet so that it does not
come away and cause flooding.
IMPORTANT
