Fagor CNC 8060 Translation Of The Original Manual Download Page 94

Page: 94 / 180

Remote modules.

CNC 8060
CNC 8065

RIOW REMOTE MODULES.

(CANOPEN

PROTOCOL).

RIOW-PS24 modu

le.

·94·

: 1906)

5.6

RIOW-PS24 module.

This module is in charge of supplying power to the I/O modules through the side jumpers
with 24 V 10A. If when configuring the remote group, the consumption of the I/O modules
is higher, additional RIOW-PS24 modules must be added.

Power the module with an external 24V DC regulated power supply.

Power supply.

0 V reference signal.

Ground connection.

Power supply.

0 V reference signal.

Ground connection.

LED indicating the voltage at side
jumpers.

Jumpers to power the next module.

Summary of Contents for CNC 8060





















































































































































































Search results

Summary of Contents for CNC 8060

Reviews:

Related manuals for CNC 8060

Brands by name

Popular brands

Fagor CNC 8060, Translation Of The Original Manual

Search results

Summary of Contents for CNC 8060

Reviews:

Related manuals for CNC 8060

Brands by name

Popular brands