8
4. OPERATION
The appliance has a safety switch located on
the base which prevents the appliance from
working if it falls accidentally. For the safety
switch to operate, the appliance must be
resting on a firm and stable surface.
IMPORTANT: Do not try to block the
safety system in any way.
Heating
•
Make sure that the temperature regulator
(2)
is in the position
before plugging
the unit in.
•
Plug it in and turn the function selector
(3)
to the desired function:
Ventilation
Low power
High Power
The light indicating appliance is switched
on will come on.
•
Turn the temperature dial
(2)
as far as it
will go clockwise to start up the heater.
•
When the atmosphere has reached the
desired temperature, turn the function selector
slowly anti-clockwise until the light goes out
and you hear a ‘click’. In this way, you will fix
the temperature and the thermostat will
regulate it automatically to remain constant.
Fan only function
•
In order to use the appliance only has a
fan, turn the function dial
(3)
to the
position.
•
Turn the temperature dial
(2)
as far as it
will go clockwise to start up the appliance.
5. CLEANING AND MAINTENANCE
•
Always switched the unit off, unplug the
cable from the socket and let the heater
cool down completely before cleaning it.
•
To clean the outside, use a soft, dry cloth.
Do not use abrasive or rough cleaners.
•
Use a vacuum cleaner to clean out the
dust inside if necessary.
WARNING:
DO NOT submerge the heater in
water or let the inside of the heater get wet,
as this could cause an electric shock.
•
Keep the heater in a dry place. Tidy the
cable into loops and fix them with tape.
6. STORAGE
•
Always fit the appliance vertically on a flat,
stable floor. The appliance will not operate if
it is not resting appropriately on the ground.
IMPORTANT: Never cover the
appliance whilst it is working as
it could cause dangerous
overheating.
Swing
The swing can be used in any of the
appliance’s functions.
In order to activate this function, press the
button
(4)
and deactivate it by pressing
the same button again.
7. INFORMATION FOR THE CORRECT
DISPOSAL OF ELECTRICAL AND
ELECTRONIC APPLIANCES
At the end of its working life, the
product must not be disposed of
as urban waste. It must be taken
to a special local authority
differentiated waste collection
centre or to a dealer providing this
service. Disposing of a household appliance
separately avoids possible negative
consequences for the environment and health
deriving from inappropriate disposal and enables
the constituent materials to be recovered to obtain
significant savings in energy and resources.
To remind you that you must collaborate with a
selective collection scheme, the symbol shown
appears on the product warning you not to
dispose of it in traditional refuse containers.
For further information, contact your local authority
or the shop where you bought the product.
interior 15/6/06 10:49 Página 7
