Fagor BC-200 Manual Download Page 6

8

7. WARNING: DO NOT OVERLOAD

THE SCALES

If the load capacity is exceed by 1%, the
scales may be damaged and the following
warning will appear on the display:

1.

Adjust the scales as described above.

2.

Weigh the first article. If you wish to add
further articles, press         to set the
scales to 

0

:

3.

You can now place any additional articles
to be weighed in the bowl, repeating
these last two steps if you wish. The net

8. BATTERY LOW INDICATOR

When the battery needs replacing, the
following message will appear on the
display: 

When this happens, follow the adjustment
instructions. 

Remember that batteries are
not household waste. Spent
batteries must be disposed of
in the special containers
provided.

9. USING THE TARE BUTTON (4)

6.

Make sure that the scales show "zero"
weight before starting to weigh. If not,
press the tare button to reset (4).

7.

If the scales are not used, they will
automatically switch off after 1 minute.
You can also switch them off manually
by pressing the         button. 

weight of the additional article will appear
on the display:

4.

If you remove an article from the bowl,
a negative value (-) will appear. This
represents the weight of the article you
have removed. 
Press the         button again each time
you remove an article, to set the
reading to 0 again:

NOTE:

When you activate the scales

for the first time, if no reading appears
or if the reading does not stabilise at 0,
you can also press the        button.

a.

Switch on the scales by pressing the
button.   

b.

Press the       button. A bell (      ) will
appear at the top left of the display.

c.

Press 

or 

to programme the

desired time lapse. Each time 

or 

is

pressed, the time interval will increase
or decrease by 10 seconds.

d.

Press the         button again to start the
countdown.

e.

When the timer reaches "

00:00

", the

alarm buzzer will sound. The buzzer will
sound 30 times and then automatically
switch off.

f.

To stop the alarm buzzer, press the
button to switch off the scales.

g.

To stop the countdown, press the
button. To reprogramme it, press it
again.

10. ALARM TIMER

interior    8/3/06  10:35  Página 7

Summary of Contents for BC-200














Reviews: