Digital Brushless AC servo drive system - Ref.0707
MCSi-79/84
WARNINGS
The warnings indicate that the drive is approaching an error limit. Thus:
Before the drive display shows errors E.201, E.202 and E.314, it will
issue a warning with fast flashing (0.5 s) of the
BUS ACTIVITY
indicator.
If this behavior continues for longer than 5 s, the display will show one
of the errors mentioned earlier.
Warning W.003.
Warning due to a drive power-up failure. It will appear
in the following circumstances. When a unit is powered up and:
The connector of the Crowbar resistor has not been installed.
The Crowbar resistor is open.