Faema SMART / S, Use And Installation, Page: 11 / 20

7 EN
English
BEFORE YOU START
Groups
• Hook up the ¿ lter holders to the groups (without coffee).
• Let each group dispense water for about a minute.
Hot water
• Continuously dispense hot water (pressing the appropriate button) until at least 6 litres of water
have been dispensed for a machine with 2 groups (see the “Hot water dispensing” chapter in the
User’s Manual).
Steam
• Dispense steam from the nozzles for about a minute, using the appropriate buttons.
DURING OPERATION
Steam dispensing
• Before heating the beverage (water, milk, etc.), open the steam nozzle for at least 3 seconds and
let the steam escape so that condensation is eliminated.
Coffee dispensing
• If the machine has not been used for more than an hour, before using the hot water, dispense
about 100 cc and discard the liquid.
Hot water dispensing
• If the machine has not been used for more than an hour, before using the hot water, dispense
about 200 cc and discard the liquid.
Cleaning the coffee circuits
• Please read the speci ¿ c section in the user’s manual to learn how to clean these circuits.
WARNING
: BEFORE YOU START OPERATING THE MACHINE, WASH THE INTERNAL
COMPONENTS FOLLOWING THE INSTRUCTIONS INDICATED BELOW.
THESE STEPS MUST BE REPEATED AT LEAST ONCE A DAY AND WHEN THE MA-
CHINE HAS NOT BEEN OPERATED FOR MORE THAN 8 HOURS.
6. Rules for the worker operating the machine