Command mode (turn Encoder 14)
Acc0
no acceleration by faster turning
Acc1
low acceleration by faster turning
Acc2
middle acceleration by faster turning
Acc3
max acceleration by faster turning
Options menu by pressing encoder 14 quickly:
-
Copy command mode to all encoders in the same group (hold encoder 4 while running bar lines shown)
-
-
-
Cancel options menu (press encoder 16 quickly)
Command channel (turn Encoder 4)
@
01
....
@
16
choose MIDI channel 1 to 16
Options menu by pressing encoder 4 quickly:
-
Copy channel number to all encoders in the same group (hold encoder 4 while running bar lines shown)
-
Fill channel numbers in the same group with ascending numbers (hold encoder 8 while running bar lines)
-
-
Cancel options menu (press encoder 16 quickly)
Command number (turn Encoder 7 / 8)
000
....
127
choose controller or note number 0 to 127 for note and CC commands
000
....
031
0 to 31 (MSB) for high CC resolution mode (32 to 63 for LSB follows automatically)
000
....
127/000
....
127
0 to 127 (MSB) / 0 to 127 (LSB) for NRPN commands
Options menu by pressing encoder 7 / 8 quickly:
-
Copy command number to all encoders in the same group (hold encoder 4 while running bar lines shown)
-
Fill command numbers in same group with ascending numbers (hold encoder 8 while running bar lines)
-
-
Cancel options menu (press encoder 16 quickly)
Lower / upper value (turn Encoder 12 / 16)
000
....
127
choose a lower value (0 to 127) for all command types except relative modes and notes
000
....
127
choose an upper value (0 to 127) for all command types except relative modes and notes
Set a higher amount in lower value as the upper value to have an inverted control.
Options menu by pressing encoder 12 / 16 quickly:
-
Copy lower / upper values to all encoders in the same group (hold encoder 4 while running bar lines)
-
Set lower / upper values in the same group by the current value of the selected encoder (hold down
encoder 8 while running bar lines shown)
-
-
Cancel options menu (press encoder 16 quickly)
