DECATHLON _
CODE SEA 83
.
Instruction Manual
10
COWLING INSTALLATION.
Trim and cut.
Trim and cut.
Pushrod wire.
4) Bolt the engine to the engine mount using
the four machine screws. Double check that
all the screws are tight before proceeding.
155mm
.
4.2 mm diameter.
Machine Screw 4x30mm.
Pushrod wire.
MOUNTING THE ENGINE.
3) Remove the engine. Using an drill bit,
drill the mounting holes through the engine
mount at the four locations marked.
1) Place your engine onto the engine
mount. Adjust the engine is centered of the
edges of the engine case.
2) When you are satisfied with the align-
ment, mark the locations of the engine
mounting.
