factoryfurniture.co.uk
Sonobe Bench
OPERATION & MAINTENANCE MANUAL
Page 1: ...factoryfurniture co uk Sonobe Bench OPERATION MAINTENANCE MANUAL ...
Page 2: ...d finish as standard polyester powder coated option available Anchored to ground via 3 no M10 x 75mm sleeve anchor per bench Please note that when a powder coat is applied to a hot dip galvanised surface pinholing can occur in the surface finish this is not considered a defect Concrete Option Seat material Smooth or exposed aggregate concrete A variety of stone effects are available in either smoo...
Page 3: ...in the reordering section towards the end of this manual Galvanised Surfaces For light damage to hot dipped galvanised finishes repair using a high performance cold galvanising zinc spray 70 zinc or above Spray application should be carried out in accordance with approved methods detailed by the product manufacturer Please note that it is advisable to use professional painters to achieve best resu...
Page 4: ...00 300 345 Ctrs 270 Ctrs 685 450 795 130 5 1 3 0 5 Front of bench Bench base plate welded to body M8 x 12mm cap screw fixing top slat panel to bench body M8 x 12mm cap screw fixing top slat panel to bench body 270 Ctrs 900x800x300mm C20 Concrete Base recommended M10 x 75mm sleeve anchor into Ø12 x 80mm hole in foundation X Section Thro Bench 3 Position bench in correct orientation with outer footp...
