Repairs
FSC Timber
For light damage, please see section on specific maintenance details above. For instances of heavy damage,
the timber item should be replaced. Please order against the part number reference in the reordering section
towards the end of this manual.
Galvanised Surfaces
For light damage to hot dipped galvanised finishes repair using a high performance cold galvanising zinc spray
(70% zinc or above). Spray application should be carried out in accordance with approved methods detailed by
the product manufacturer. Please note that it is advisable to use professional painters to achieve best results
when touching up larger areas.
Polyester Powder Coated Surfaces
For light damage (scratches, chips etc.) repair using touch-up paint to match original colour (available from
Factory Furniture Ltd). Paint application should be carried out in accordance with approved methods detailed
by the paint manufacturer. Please note that it is advisable to use professional painters to achieve best results
when touching up larger areas. Products for respraying larger areas are available from Factory Furniture Ltd.
Heavy Damage
In the event of serious damage to any component, replacements should be ordered from Factory Furniture Ltd.
In this event (or if the product needs to be disassembled for any reason), please contact Factory Furniture for
detailed technical advice.
Contacts
Factory Furniture Ltd
5 Pioneer Road
Faringdon, Oxon
SN7 7BU UK
Tel
+44 (0) 1367 242731
Email [email protected]
Web
www.factoryfurniture.co.uk
3
QUAY CYCLE STANDS repairs
