factoryfurniture.co.uk
Installation Instructions
All installation works to be carried out by competent
personnel - install as complete unit.
Osso
3
Bench
(surface fix only)
1.
If necessary bolt three bench elements together
using 3 no. fixing plate spacers and 12 no. M8 x
30mm button head bolts & locknuts provided.
2.
Install suitable foundation pads (see illustration)
each with top face at ground level
3.
Position bench in correct orientation with bases
centrally on foundation pads, then mark hole
positions through base plates.
4.
Remove the bench; drill holes Ø16mm x 75mm
deep (or as bolt manufacturer’s recommendations).
Clear debris from holes.
5.
Reposition bench and fix to foundation pads using
6 no. zinc-coated M10 x 75mm sleeve anchors
tightened to 50Nm (or as per manufacturer’s
instruction). Check levels
M8 x 30mm
button head
bolt & locknut
Fixing plate
as spacer
Hub plate
welded to one
of the three
bench sections
