background image

Repairs

FSC Timber

For light damage, please see section on specific maintenance details above.  For instances of heavy damage, 
the timber item should be replaced. Please order against the part number reference in the reordering section 
towards the end of this manual.

Stainless Steel

Light damage (surface scratches etc.) can be removed using an emery pad (240 grit) and freeing oil such as 
‘WD40’. Care should  be  taken  to  follow  the  direction  of  the  brushing  grain.  It  is recommended that  a  trial  
repair  be  carried  out  on  an unimportant surface first. No corrosive cleaners or other abrasives should be used. 
Any contamination, particularly carbon steel scuffs from vehicles, should be quickly removed to avoid corrosion.

Heavy Damage

In the event of serious damage to any component, replacements should be ordered from Factory Furniture Ltd.  
Should  further  assistance  be  required  (or  if  the  product  needs  to  be  disassembled  for  any  reason),  please 
contact Factory Furniture for detailed technical advice.

Reordering / Spares

Part #   

Item Description

P1033 / 01 

1 no. Oh Bench complete slat set (32 slats in total)

Instructions For Reordering

If possible, please specify job name or number at the time of reordering to enable identification of details such 
as  the  original  species  of  timber  used,  stainless  steel  finishes  and  polyester  powder  coat  colours  etc.  In  any 
event  where  either,  additional  orders  are  required,  or  spares  and  replacements  are  required  please  contact 
Factory Furniture Ltd. Using the part numbers given above as reference should help us to process your enquiry 
more efficiently.

Note - All fittings required to assemble ordered parts will automatically be included in the order.

AutoCAD Drawing List

FF1033 / 01 

OH BENCH 

 

GENERAL ARRANGEMENT DRAWINGS

FF1033 / 02 

OH BENCH 

 

FABRICATION DRAWINGS

FF1033 / 03 

OH BENCH 

 

TIMBER PARTS

FF1033 / 04 

OH BENCH 

 

STEEL PARTS

FF1033 / 05 

OH BENCH 

 

SETTING OUT DRAWINGS

Contacts

Factory Furniture Ltd
5 Pioneer Road
Faringdon, Oxon
SN7 7BU     UK

Tel  

+44 (0) 1367 242731

Email   [email protected]
Web  www.factoryfurniture.co.uk

3

OH BENCH repairs

Summary of Contents for OH bench

Page 1: ...Road Faringdon Oxfordshire SN7 7BU T 44 0 1367 242731 hello factoryfurniture co uk www factoryfurniture co uk We reserve the right to change specification without notice 2017 Factory Furniture Ltd Operation Maintenance Manual OH bench ...

Page 2: ...leg anchored into suitable concrete foundation via 2 no resin fixed M10 x 130mm threaded rods and cap nuts per base 12 no total General Maintenance Recommended Schedule Guidelines Daily Weekly Monthly or as adopted Visual checks of bench top frame and legs check all items for superficial or physical damage Three Monthly Clean all items as detailed below check all fixings are seated correctly inspe...

Page 3: ...e contact Factory Furniture for detailed technical advice Reordering Spares Part Item Description P1033 01 1 no Oh Bench complete slat set 32 slats in total Instructions For Reordering If possible please specify job name or number at the time of reordering to enable identification of details such as the original species of timber used stainless steel finishes and polyester powder coat colours etc ...

Page 4: ...d 3 Position bench in correct orientation with frame centred on tree column then mark hole positions through base plates onto foundation pads 4 Move the bench and drill holes Ø12mm x 125mm deep 5 Clear debris from holes 6 Fill the holes to within approximately 35mm from the top with Hilti HY150 resin or similar Lift the bench placing threaded anchor rods capnuts in place and carefully lower the an...

Reviews: