background image

Factory Furniture Ltd 

|

 5 Pioneer Road 

|

 Faringdon 

|

 Oxfordshire SN7 7BU 

|

 T +44 (0)1367 242731

[email protected] 

|

 www.factoryfurniture.co.uk

We reserve the right to change specification without notice.  © 2017 Factory Furniture Ltd

Operation & Maintenance Manual

OH bench

Summary of Contents for OH bench

Page 1: ...Road Faringdon Oxfordshire SN7 7BU T 44 0 1367 242731 hello factoryfurniture co uk www factoryfurniture co uk We reserve the right to change specification without notice 2017 Factory Furniture Ltd Operation Maintenance Manual OH bench ...

Page 2: ...leg anchored into suitable concrete foundation via 2 no resin fixed M10 x 130mm threaded rods and cap nuts per base 12 no total General Maintenance Recommended Schedule Guidelines Daily Weekly Monthly or as adopted Visual checks of bench top frame and legs check all items for superficial or physical damage Three Monthly Clean all items as detailed below check all fixings are seated correctly inspe...

Page 3: ...e contact Factory Furniture for detailed technical advice Reordering Spares Part Item Description P1033 01 1 no Oh Bench complete slat set 32 slats in total Instructions For Reordering If possible please specify job name or number at the time of reordering to enable identification of details such as the original species of timber used stainless steel finishes and polyester powder coat colours etc ...

Page 4: ...d 3 Position bench in correct orientation with frame centred on tree column then mark hole positions through base plates onto foundation pads 4 Move the bench and drill holes Ø12mm x 125mm deep 5 Clear debris from holes 6 Fill the holes to within approximately 35mm from the top with Hilti HY150 resin or similar Lift the bench placing threaded anchor rods capnuts in place and carefully lower the an...

Reviews: