&
5HVSRQVLEOH
)RUHVW0DQDJHPHQW
Introduction
Design
Design, shop drawings and development by Factory Furniture Ltd.
Manufacture
Factory Furniture manufactured components. Products are assembled in Factory workshops, checked and
dispatched ready for installation. Replacement products or components thereof should be ordered direct from
Factory Furniture Ltd.
Copyright
The design copyright for the product and drawing copyright remains the sole property of Factory Furniture Ltd.
General Specifications
Seat
Metric
length 2300mm | width 800mm | height 940mm
Imperial
length 7’ 6½” | width 2’ 7½” | height 3’ 1”
Approx Weight
158kg
(167kg with optional armrests)
Overall Fixing Centres
2140mm (7’ ½”) x 200mm (8”)
Detailed Material & Finish Specifications
Seat Slats
• Manufactured from FSC
®
certified tropical hardwood
• Profiled and left untreated as standard
(oil or microporous woodstain treatment available
on request)
Frame
• Side panel assemblies manufactured from stainless steel and featuring an all welded construction - satin
polished or polyester powder coated finish
(powder coat colour grey as standard or to customer specification)
• 4 no. stainless steel frame tube assemblies bolted to frame
• Anchored (surface fix) using 2 no. resin fixed M10 x 200mm threaded rods and cap nuts per foot (4 no. fixings
in total)
Armrests
(Optional)
• 4 no. armrests welded to frame at equal spacings along seat
• Manufactured from stainless steel - satin polished or polyester powder coated finish as per frame
(powder
coat colour grey as standard or to customer specification)
General Maintenance
(Recommended Schedule & Guidelines)
Daily/Weekly/Monthly
(or as adopted)
Visual checks of seat top and frame - check all items for superficial or physical damage.
Three Monthly
Clean all items as detailed below check all fixings are seated correctly; inspect timber for serious damage and
splinters.
Six Monthly
Secure all fixings; full clean as detailed below; check that seat is firmly secured to the ground
Specific Maintenance Details
FSC Timber
Clean with a stiff brush once per year, especially in more exposed locations, in order to prevent a verdigris type
build up on the timber surface. Ideally this should be completed in early spring. During the cleaning stage, all
exposed timber surfaces should be inspected for splits and splinters. Any splinters and graffiti should be removed
and the surface sanded with 100 grit sandpaper in order to remove any uneven / sharp edges or surfaces.
During the first few months after installation the tannin naturally occurring in the timber may leach out and
cause a brown staining on the bases. This may be removed with a light solution of household bleach and water.
Stainless Steel
(polished stainless steel only)
Clean as required, but at least every three months, using a stainless steel polish and a lint free cloth. To remove
ground in dirt, a stainless steel finishing pad may be required.
Polyester Powder Coated
For general cleaning using a damp cloth and warm soapy water only. Scourers and abrasive cleaners are NOT
suitable for these types of finish and may damage them. Before using any cleaning agents to remove graffiti
etc. try on a small, inconspicuous area first to avoid causing more unsightly damage.
2
BOORT SEAT specification
