www.factorybuysdirect.com
160945-02A
4
Outer Shell
Ignitor
Button
Control Knob
Figure 1 - 80,000 Btu Model Shown
UNPACKING
1. Remove all packing items applied to heater for shipment. Keep plastic cover caps (attached
to inlet connector and hose/regulator assembly) for storage.
2. Remove all items from carton.
3. Check all items for shipping damage. If heater is damaged, promptly inform dealer where
you bought heater.
VENTILATION
WARNING: Provide at least a 2.5 square foot (0.23 m
2
) opening
of fresh, outside air while running heater. If proper fresh, outside air
ventilation is not provided, carbon monoxide poisoning can occur.
Provide proper fresh, outside air ventilation before running heater.
THEORY OF OPERATION
Fuel System:
The hose/regulator assembly attaches to the propane gas supply. This provides
fuel to the heater.
Ignition System:
The piezo ignitor lights the pilot.
Automatic Control System:
This system causes the heater to shut down if the flame goes out.
PRODUCT IDENTIFICATION
SAFETY
27. Use only original replacement parts. This
heater must use design-specific parts.
Do not substitute or use generic parts.
Improper replacement parts could cause
serious or fatal injuries.
28. Do not direct heat toward propane/LP
cylinders within 20 ft (6 m).
