Factor Electronics VERSA-6.5 Manual Download Page 2

-02-

1

2

3

4

5

6

7

Please read the instructions carefully before installation and 

use. Keep the manual safe for future reference.

Prior to installing the speakers into any ceiling or wall, check 

the structure for weight bearing ability and avoid contact 

with any wiring or plumbing that might be behind the surface 

area. Installing on soft materials or in areas incapable of 

supporting the speakers’ weight may cause personal injury 

or damage to the speaker. When installing VERSA-6.5

speakers outside, choose areas such as the underside of 

eaves to avoid strong direct sunlight which may affect the 

color and life of the speaker enclosure.

When placing the speakers on a wall or shelf, it is 

recommended that speakers be installed at the level of the 

ear or slightly higher.

Damage to the woofer and tweeter may occur if the speaker 

is dropped or hit - resulting in no sound or distorted sound. 

Use only approved and certified wiring in your installation, do 

not stretch or place the wire in contact with sharp objects.

Never overdrive your speakers to the point of distortion and 

always reduce volume prior to switching input sources 

(e.g.: FM to CD).

Turn off the power to the speaker when unused for long 

periods of time.

To tilt the speaker, loosen the adjustment screw found on the 

bracket. Tilt the speaker to the desired position and tighten 

the screws securely.  

VERSA-6.5  speakers can be used as hanging ceiling, wall 

mounted or as floor speakers. VERSA-6.5

 can rotate 360 °  

up and down while hanging or in wall mount position.   

NOTE: It is not recommended to rotate after installation 

due to its weight.  

8

9

SAFETY INSTRUCTIONS

Summary of Contents for VERSA-6.5











Reviews: