⑤
Click to configure
the selected Matrix’s TCP control configurations
⑥
Click to connect or disconnect the PC and the Matrix ( Connection will be established
automatically before control commands are sent )
⑦
Click to refresh the device status: include the device information displayed in
⑨
area and
Input/output port connection status in
⑩
area.
NOTE:
Tab pages cannot be changed while the control command is processing.
⑧
To enable or disable Input/output tags when setting the buttons on the
“Setting” page
focused
⑨
Device information display area
⑩
Input/output port connection status
Set TCP control configuration
Click Config button to show the TCP configuration window.
①
Set the tag to identify the Matrix device
②
Set IP mode: the Subnet should support DHCP protocol when set to Auto IP mode, then
the Matrix will obtain an IP automatically. Otherwise, set to Static IP mode and designate a
useable IP for the Matrix.
6
5
4
3
2
1
