Installation Instructions
Fig.1
Fig.A
Packaging
Fig.B
Fig.C
TOOL NEEDED:
Top Rail
Your air conditioner is designed to be installed in standard
double hung windows with opening widths of 23 to 26
inches(584 mm to 914 mm)(FIG.1)
Lower sash must be opened sufficiently to allow a clear vertical
openinng of 14-1/2 inches (368 mm).
Side louvers and the
rear of the AC must have clear air space to allow
enough airflow through the condenser,for hear removal.
The rear of the unit must be outdoors,not inside a
building or garage.
NOTE
: KEEP CARTON and these INSTALLATION
INSTRUCTIONS for future reference.The carton is the
best way to store unit during winter,or when not in use.
Some assembly is required. Please read these instructions
carefully.
3/4”screws
Drill(If pilot holcs are needed)
When handling unit,be careful to avoid cuts
from sharp metal edges and aluminum fins in
front and rear coils.
Before installing unit,the top rail must be assembled
on the unit.
A. Remove the air
conditioner from the
carton and place on a
flat surface.
B. Remove top rail from
the bottom of the
packaging material as
shown in Fig.A
C, Align the hole in the
top rail with those in
the top of the unit as
shown in Fig,B
D. Secure the top rail to
the unit with the 3/8”
Screws as shown in
Fig.C
NOTE:FOR SAFETY REASONS,ALL
FOUR(4)SCREWS MUST BE SECURELY
FASTENED.
Qty.
Mounting Hardware
sash lock
TOOLS NEEDED:
Phillips screwdriver
Top Rail Hardware
Qty.
Top Rail
Screw
4
6
1
1
6
Phillips Screwdriver
