6629024
FT-15B
4
1. Always disconnect the cord from the electrical outlet when cleaning your fan.
2. Light accumulated dust may be removed by using a soft cloth to wipe away the dust at the back
grille of the fan.
3. Wipe the exterior surfaces of the fan occasionally with a damp cloth (not dripping wet) and dry
thoroughly with a soft dry cloth before operating the fan.
4. Do not use harsh cleaners or materials to clean this unit, doing so will cause damages to it.
CAUTION
:
DO NOT IMMERSE INTO WATER OR ALLOW WATER TO RUN INTO THE INTERIOR
OF THE FAN AS THIS COULD CREATE A FIRE OR ELECTRIC SHOCK HAZARD. THE FAN
MOTOR IS FACTORY LUBRICATED FOR LIFE AND WILL REQUIRE NO FURTHER
LUBRICATION. NO OTHER USER MAINTENANCE IS REQUIRED OR RECOMMENDED.
IF
SERVICE IS REQUIRED, PLEASE CONTACT CUSTOMER SERVICE.
TO STORE
1. Follow cleaning instructions 1-4 above.
2. Retain the original packaging to store your fan.
3. Always store in a dry place.
4. Never store while still plugged in.
5. Never wrap cord tightly around the fan or put any stress on the cord where it enters the fan as it
could cause the cord to fray or break.
TROUBLESHOOTING
If your fan fails to operate, please follow these procedures:
PROBLEM
PROBABLE CAUSE
SOLUTION
Fan is not plugged into a
120V AC, 60Hz
polarized
outlet/receptacle.
Ensure unit is in the OFF
position. Plug in unit and
attempt to turn on again.
Fan is not turning on.
Breaker has tripped /fuse
has been blown.
Please check your electrical box
to confirm the breaker has not
been tripped. Ensure unit is in
OFF position. Plug in unit and
attempt to turn on again.
Attempt to plug unit in another
receptacle in the house.
Fan is on but air coming
out of it is not strong
enough.
There is dust built up at the
back of the fan.
Turn fan OFF and unplug. Using a
soft, dry cloth, wipe the back of the
grille to remove any dust build-up.
Plug in unit and turn fan back ON to
resume normal operation.
PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE FAN YOURSELF, DOING SO CAUSE
DAMAGE OR PERSONAL INJURY.