2
OPERATING INSTRUCTIONS
1. Plug the power supply cord into a wall outlet.
2. Fan speed is controlled by the sliding sknob:
1 (Low), 0 (Off), 2 (High).
3. The direction of the air flow can be adjusted
upward or downward by loosening the angle
adustment knob. Retighten knob securely.
4. The fan has three parts: the fan
head, the clip and the base.
FAN SPEED CONTROL
1
2
0
1. Never insert fingers, pencils or any other object through the grille when the fan is
running.
2. Disconnect the fan when moving from one location to another.
3. Disconnect the fan when removing the grilles for cleaning.
4. Be sure the fan is on a stable surface when operating to prevent it from
overturning.
5. DO NOT use the fan in a window. Rain may create an electrical hazard.
6. Indoor use only.
IMPORTANT:
During the first few minutes of initial use, you may notice a slight
smell of motor lubricant, which was added at the factory. This is normal and will
quickly disappear.
1. To reduce the risk of fire or electric shock, do not use this fan with any solid-state
speed control device.
2. This appliance has a polarized plug (one blade is wider than the other). To reduce
the risk of electric shock, this plug is intended to fit in a polarized outlet only one
way. If the plug does not fit all the way into the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not attempt to bypass this safety
feature.
3. DO NOT use the fan in a window. Rain may create an electrical hazard. Do not
leave the fan operating adjacent to an area where water has collected to avoid a
potential electrical hazard. Do not immerse unit, plug or cord in water or spray
with liquids.
4. Do not leave the fan running unattended.
5. Make sure the voltage of the power supply is the same as shown on the
fan nameplate.
WARNING
RULES FOR SAFE OPERATION
Read the Rules for Safe Operation and the Instructions carefully.
CAUTION
