While the mode selector switch is in
Stereo
mode the amplifi er is a binaural ampli-
fi er. Both input and output channels amplify independent of each other.
To use stereo mode
follow these steps:
1. Turn off the amplifi er.
2. Toggle the mode selector switch to the “Stereo” position.
3. Attach speakers into the NL4 or binding post connections,
(both A & B if desired).
4. Input signal into channel A & B, turn both front controls down.
5. Turn amplifi er on.
6. Slowly turn up Ch. A & B front controls until desired signal level is reached.
7. Check that amplifi er is running properly (not showing Clip / Fault LED’s).
Stereo
Amplifi er
(Rear view)
≥2Ω
Mixer (Console)
Outputs
Inputs
L R
1 2
Monitors
≥2Ω
Connections
+
–
1
+
2
–
2
+
1
–
≥2Ω
Ch. A & B
9
