Fac S220 Pro, Installation, Use And Maintenance Manual

Page: 16 / 32

12
COMMANDS
START AND STOP BUTTONS
Press the white or green button (1) to start running the blade.
The light turns on to indicate that the machine works correctly.
Press the red or black button to stop the blade.
Slice thickness
can be adjusted by turning the graduated knob (4)
counterclockwise.
Thickness adjustment range:
see paragraph "Technical description and
conditions of use”.
FUNCTIONING TEST AND BLADE ROTATION DIRECTION
Start the machine and check whether the light is on; make sure that the blade
rotates in the direction indicated by the arrow (counterclockwise if you look at the
machine from the blade plate side).
For machines with three-phase supply: if the blade rotates in the other
direction, stop the machine immediately and call qualified personnel to invert the
plug supply wires .
Ascertain that the carriage and the product grip slide correctly;
Ascertain that the gauge plate works and adjust thickness to desired value.