Fac HR 100, Use And Maintenance Manual

Page: 20 / 24

18
To perform the analysis, a specimen was put into contact with 5000 ml of water simulant for 2 hours
at 40°C at third contact.
Aluminium was searched for on the simulant coming from contact, using the ICP-MS technique, as
envisioned by the «Guideline regarding metals and alloys used for materials and items in contact
with foodstuffs» dated 2013.
Component Result Unit of Method Limit of release Evaluation
measurement (mg/kg)
Aluminium < 0,10 mg/kg EPA ref. 5 Compliant
6010D 2018
The simulants and test conditions are selected on the basis of the Directives 82/711/EEC and
85/572/EEC and as amended and Decree n.338 dated 22/07/1998. (See note at the end of the
document regarding art. 22 of Reg. (EU) n.10/2011 on Transitional Provisions).
The overall migration limit, along with the other restrictions/specific migrations to which the
monomers and/or additives present in the material are subjected, are respected in the conditions
of use mentioned above. The affirmation is supported by analytical tests performed in compliance
with the Directives 82/711/EEC, 85/572/EEC and 97/48/EC and with Italian Ministerial Decree
21/03/1973 or on the basis of the calculations carried out considering the content of the substances
subjected to migration limits. The calculations were made assuming that 1 kg foodstuff comes into
contact with 1 product.
The material contains substances governed by Regulations (EC) n. 1333/2008 and 1334/2008 and
as amended (substances called “dual use”).
According to experimental data and/or theoretical calculations, these substances are compliant
pursuant to art. 11 of Regulation (EU) n.10/2011 paragraph 3, letters a and b and of Italian Ministerial
Decree 21/03/73.
This declaration is valid from the date shown below and will be previously replaced if changes
are made to production/formulation of the material or if the references to legislation in point 1 are
modified and updated in a way to require a new verification to confirm conformity.
NOTE: this declaration is drawn-up pursuant to art. 22, paragraph 1: “Transitional Provisions” and
art. 23 “Coming into force and application” of the Regulation (EU) n.10/2011.
The following Test Reports relative to the migration test performed are available on the site
Rdp 11 13508-01 dated 19/12/2018 Bpsec S.r.l.
REPORT 11°13508-01 dated 19/12/2018 Bpsec S.r.l.
ORIGINAL IS IN ITALIAN LANGUAGE