Fac C3, Instructions For Use And Maintenance Manual

Page: 19 / 36

19
EN
Do not under any circumstances tamper with, remove or
bypass the safety devices installed on the appliance.
APPLIANCE DESCRIPTION
• The appliance consists of a base that supports a pot containing two rotating blades
screwed onto a spindle.
• The food is chopped up or reduced to pulp depending on the operating time of the two
blades.
• All the appliance components are made of polished and anodically oxidised aluminium
alloy, stainless steel and plastic for food use.
• The blades are driven by an electric motor and motion transmission is achieved with
a longitudinally scored belt.
• The appliance is started and stopped with a button connected to the auxiliary control
circuit which prevents accidental starting following a power failure.
INTENDED USE
• For the intended and proper use of the appliance, read the note on page 11.
Use the appliance only for the intended uses. Improper use
of the appliance and different from the permitted uses may
cause a risk to the safety and health of persons as well as
economic damage.
NOT INTENDED OR IMPROPER USE
• Do not process hard foods such as bones, shells, frozen foods, ice. The blades would
be damaged!
• Do not fill the pot to over half its capacity; the upper part of the blade must be free to
be able to remove it.