Cleaning Exterior surfaces:
Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent
(e.g. Comet Power Scruv
®
, EZ-Off
®
oven cleaner), or steel wool/scoring pads, which will scratch and dam
-
age the stainless steel surface.
For heavier soil use liquid degrease such as “Forumla 409
®
” or “Fantastic
®
” brand cleaner.
After cleaning, you may use non abrasive stainless steel polish/cleaner such as 3M
®
or ZEP
®
, to polish and
buff out the stainless luster and grain. Always scrub lightly, with clean cotton cloth, and with the grain.
Cleaning Stainless Steel Baffle Filter:
The metal filters fitted by the factory are intended to filter out residue and grease from cooking. It need not
be replaced on a regular basis but are required to be kept clean.
Filters should be cleaned after every 30 hours of use.
Remove and clean by hand or dishwasher. Spray “Formula 409
®
” or equivalent degreasing detergent and
leave to soak if heavily soiled. Dry filters and re-install before using hood.
Replacing Filters:
Should filters wear out due to age and prolonged use, please contact FABYKA for replacement filters.
Note: Also replace damaged filter that has punctured or broken mesh, bent or broken frame.
Replacing the light bulb:
This range hood uses halogen bulb type (MR16) 35W 12V.
Available at FABYKA.
Make sure the lights are cool to touch, carefully align the arrow on the inner ring with the arrow on the outer
ring where it says OPEN. The inner ring will loosen and the light bulb will be available for removal. Install
a new halogen light bulb and reverse the steps.
•
•
•
•
•
•
•
•
•
•
WARNING
Hazard of Burns!
Light bulb become extremely hot when turned on.
DO NOT touch bulb until switched off and cooled.
Touching hot bulbs could cause serious burns.
Page 6
Maintenance
Align arrows on both rings
Summary of Contents for FA Series
Page 19: ...Page 18 Service Note ...
Page 20: ......
