FabWeaver A530, User Manual

Page: 28 / 120

1
-2
Preparation for Use
1
1. Specifications
1.1 Printing
Printing Method Fused Filament Fabrication (FFF)
Max. Print Length (mm) W (max): 310, D (max): 310, H (max): 310
Print Layer Thickness Setting 0.05–0.4 mm
Default (Optional) Nozzle Diameter
0.4 mm
Filament Diameter 1.75 mm
Printable Material ABS, ASA, RSA, PLA(Optional)
Bed Leveling Auto adju Manual leveling
Print Head 2-nozzle
1.2 Temperature/Speed
Max. Nozzle Temperature
290℃
Max. Bed Temperature
110℃
Max. Printing Speed 200 mm/s
* Continuous operation at max. temperature may cause malfunctions. Please, set in a special case such as nozzle
clogging and other troubles
1.3 Main Body
Power Max. 1050W
Dimension (mm) 747 x 810 x 784 (W x D x H)
Weight 112kg
Port USB devices, USB hosts, Wi-Fi, Ethernet
Filament Auto load/Unload
1.4 Software/Support
Software
Weaver3 Studio
File Format
*.w3s, *.stl, *.ply, *.obj, *.amf
Operating System
Window 10 or higher (64bit only)
Recommended Memory Requirements
DRAM 8 GB+ / VRAM 2 GB+
Note
- GPU should support OpenGL 4.1 or higher.
1.5 Default of Print Layer Width
Nozzle Diameter 0.4 mm
Print Layer Width 0.25 mm