background image

HEAT

HOLD

HEAT

HOLD

OPERATING YOUR KETTLE

5. You can only select 1 preset at a time. Once the preset was selected, the 
    button will flash 4 times, and the kettle will start heating up the water. The 
    Heat Icon        will display on.

6.  Press the preset button again at any time before the kettle is finished heating. 
    This will turn on Hold Temperature mode, which will automatically keep the 
    kettle at the same temperature for 60 minutes after heating is finished. 
    The Hold Icon        will appear on the display.

7. Once the water reaches your selected temperature, the kettle will beep 3 
    times and stop heating. The Heat Icon        will disappear.

8. To manually interrupt the heating process, press the         button at any time.

Note:

    • If you take the kettle off the base while heating or Holding, all buttons will 
      flash, and the kettle will pause working. If you put the kettle back within 60 
      seconds, it will resume working. After 60 seconds, the kettle will turn off.
    • If the kettle is heating without water in it, a boil-dry protection device will 
      automatically turn it OFF.  

HOLD

HEAT

HEAT

[ See boil-dry protection explanation. ]

7

Fabuletta.com

Summary of Contents for FKT001



















Reviews: