background image

2008-2011 FORD SUPER DUTY 4WD 

REAR LIFT FOR 6” F-250 

With or Without FACTORY OVER LOAD LEAF

 

FTS22101 

PARTS LIST: 

Qua Part 

Description 

2 FTBK5 

5" 

Block 

4 FT742U 

U-Bolt 

FT58H 

5/8" Hardware  

1 FTS419 

Shim 

Kit 

FT30166 

E-Brake Cable Sleeve 

31182001081 

5/16"-18 x 2" Bolt gr.8 

31000005252 

5/16" Split Washer 

2 FT22101i 

Instruction 

Sheet 

Tool List:   (Not Included) 
 Floor 

Jack 

 Jack 

Stands 

Assorted Metric and S.A.E Sockets & Allen Wrenches  

READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION!   

IF TRUCK IS EQUIPPED WITH REAR SWAY BAR,FTS92010BK REAR SWAY BAR DROP 

BRACKET CAN BE PURCHASED.

   

Summary of Contents for FTS22101

Page 1: ...t 1 FT30166 E Brake Cable Sleeve 1 31182001081 5 16 18 x 2 Bolt gr 8 1 31000005252 5 16 Split Washer 2 FT22101i Instruction Sheet Tool List Not Included Floor Jack Jack Stands Assorted Metric and S A E Sockets Allen Wrenches READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION IF TRUCK IS EQUIPPED WITH REAR SWAY BAR FTS92010BK REAR SWAY BAR DROP BRACKET CAN BE PURCHA...

Page 2: ...and u bolts Lower the axle down slowly Use care not to over extend the brake hose NEVER WORK UNDER AN UNSUPPORTED VEHICLE 2 Locate the factory emergency brake cable bracket on the driver s side rear frame section and remove Use a die grinder with a cut off wheel and cut the bracket ONLY Remove the bracket from the cable and discard with the hardware SEE PHOTOS BELOW 2011 configuration shown above ...

Page 3: ...e short end of the blocks should face to the front of the vehicle Using the supplied u bolts nuts and washers align axle lift blocks and springs and torque to U Bolts to 90ft lbs SEE PHOTO BELOW 9 Install Fabtech shock part number FTS7266 Performance Shocks or FTS81005 Dirt Logic not included with the factory hardware and torque bolts to 65ftlbs 10 Rotate the E Brake cable bracket so that it posit...

Page 4: ...save hardware Locate the brake line bracket FT30059 Note This part is included in the front component box kit attach the side with the sleeve to the axle using the factory hardware Using the supplied 3 8 x 2 bolt nut and washer attach the brake line to the other end Reattach vent line SEE PHOTO BELOW 14 Install tires and wheels and torque lug nuts to wheel manufacturer s specifications 15 Readjust...

Reviews: