SETTING THE HOME POSITION
Upper limit location
Turn turnkey counter-clockwise
to allow shade to roll up faster
Interlocks - locks in and ensures
safe use of the roller shade
STEP 3 - SET THE HOME POSITION (THE UPPER LIMIT STOP).
This is the location where the shade will stop when fully raised.
Make sure the right side of the shade remains in the bracket.
Roll the roller shade to your desired length, see picture
below. Once you have your length set, attach the roller
shade into the left side bracket.
STEP 4 - ROLLER SHADE INSTALLATION, LEFT SIDE.
Insert the left side of the roller shade into the left bracket.
Gently position the brake pin so it is centered and squared,
then pull forward until the roller shade snaps into place.
CORRECT!
(Brake pin is centered & squared)
INCORRECT!
(Brake pin is off center!)
STEP 6 - ADJUSTING THE SPEED.
FOR AN OUTSIDE INSTALLATION
While holding the shade in place, insert the turnkey into the
right bracket.
Turning it
counter-clockwise
will allow the shade to roll up faster.
More turns will increase the speed at which the shade rises.
To decrease the speed, place the turnkey in the right side
bracket and gently support it, while placing a mini screwdriver
in the slot on the front of the bracket. This will release the
tension and allow the shade to rise slower.
STEP 5 - SECURING INTERLOCKS.
Secure the roller shade with interlocks by inserting them into
the left side bracket. See illustration below.
