Leveling the brackets
Clutch end bracket
Idler end bracket with chain
guard attached
Idler and clip end installed
(showing transit clip in vertical position)
CORRECT!
transit clip in vertical position
INCORRECT!
transit clip at an angle
CORRECT!
transit clip in horizontal position
BEFORE YOU BEGIN, VERIFY THAT YOU HAVE ALL THE NECESSARY
PARTS AND PIECES:
• PACKAGE -
Contains two universal end brackets (one will
have the chain guard already installed), one separate
chain guard with installation screws, two end caps, two
bead chain stops, and four installation screws.
Mounting the Shade and Fascia
STEP 1 - BRACKET INSTALLATION.
The brackets are universal and can be used on either side
as well as for wall, ceiling or inside installation. However,
the bracket with the factory installed chain guard must
be positioned on the “idler end”. The bracket to bracket
dimension is the shade cloth width plus 1
³⁄₈
”. Use a level to
insure a horizontal position.
Bracket must be level
STEP 2 - INSTALLING THE SHADE.
a. Begin by installing the idler end first.
There is a transit clip on the idler end of the shade.
The transit clip should be positioned either straight up and
down, or horizontal, in order to line up the idler plunger of
the idler end with the cross shaped hole in the bracket.
See illustrations below.
b. Once the idler end is seated, REMOVE the TRANSIT CLIP.
Save this clip as it will be reinstalled in Step 2d.
