Installing the Back Shade
(continued)
d) Set the lower limit/stop position.
Lower the shade to the desired long point.
Then pinch the bead chain at this point and place one
of the bead chain stops here.
One extra bead chain stop is provided in case a change
must be made.
3. Installing the Front Shade
a) Install your front shade.
Follow the same instructions as before for installing the
back shade. See steps 2(a) and 2(c).
Set the lower limit/stop position. Follow step 2(d).
transit clip
(in a vertical position)
Install idler end
Lock clutch end into
place on front shade
4. Add the End Caps
Add the end caps for a finished look.
5. Install the P-Clips Holddown.
Depress the p-clip holddown and firmly attach to the wall.
DO NOT PULL THE BEAD CHAIN TAUT, as this will prevent the bead
chain from operating smoothly.
Make sure that
both
front and back shades are held down with
the p-clips. See illustrations below.
Congratulations! You are done! If you have any questions,
please call us at
(800) 828-2500.
EST
. 19
73
EST
. 19
73
P-clip installed
