CHANGING ULTIMAKER 2 NOZZLE
The nozzle was over and over covered by melted plastic. I suggest this was white ABS. Now
black. And I remembered that the „Error Stopped Temp Sensor Bed“ issue was when I
changed the filament from PLA to ABS and on a long overnight print I saw this error in the
morning in the Ultimaker LCD display. The Ultimaker 2 extruder block is quite a block so
nobody realized this massive plastic problem.
!
The temperature sensor was broken and the tube was harmed from the permanent filament
change and manual pull back. So I
called the Ultimaker phone
support again and they sent this
other spare parts for free:
Temperature sensor cable
,
Teflon part, tube, fan holder.
!
!
!
!
!
!
2
HOWTO ULTIMAKER 2 NOZZLE
