FabiaTech PC104, User Manual

Page: 37 / 68

FabiaTech Corporation
the same as physically interchanging the connectors of the floppy disk drives.
When the function’s setting is <Enabled>, the BIOS swapped floppy drive
assignments so that Drive A becomes Drive B, and Drive B becomes Drive A under
DOS.
Available options: Disabled, Enabled
Default setting: Disabled
Floppy Drive Seek
This field is used to set if the BIOS will seek the floppy <A> drive upon boot.
Available Options: Disabled, Enabled
Default setting: Disabled
PS/2 Mouse Support
The setting of Enabled allows the system to detect a PS/2 mouse on boot up. If
detected, IRQ12 will be used for the PS/2 mouse. IRQ 12 will be reserved for
expansion cards if a PS/2 mouse is not detected. Disabled will reserve IRQ12 for
expansion cards and therefore the PS/2 mouse will not function.
Available options: Disabled, Enabled
Default setting: Enable
System Keyboard
This field specifies if an error message should be prompted when a keyboard is not
attached.
Available options: Absent, Present
Default setting: Absent
Primary Display
The field specifies the type of monitor installed in the system.
Available options: Absent, VGA/EGA, CGA40x25, CGA80x25, and Mono
Default setting: Absent
Password Check
This field enables password checking every time the computer is powered on or
every time the BIOS Setup is executed. If Always is chosen, a user password
prompt appears every time and the BIOS Setup Program executes and the
32