FabiaTech Corporation
Boot Setting Configuration
¾
Quick Boot
This field is used to activate the quick boot function of the system. When set to
Enabled,
1.
BIOS will not wait for up to 40 seconds if a Ready signal is not received from the
IDE drive, and will not configure its drive.
2.
BIOS will not wait for 0.5 seconds after sending a RESET signal to the IDE drive.
3.
You cannot run BIOS Setup at system boot since there is no delay for the Hit, Del.
To run Setup message.
Available Options: Disabled, Enabled
Default setting: Enabled
¾
Boot Up Num-Lock
This field is used to activate the Num Lock function upon system boot. If the setting
is on, after a boot, the Num Lock light is lit, and user can use the number key.
Available options: On, Off
36
