Version 1.1
FX5505 Series User’s Quick Reference
Page 1/2
www.fabiatech.com
©2007-2008 FabiaTech Corporation
1. Brief
The FX5505x is a compact size embedded system with Intel low-power Celeron-M or Pentium-M
processor board inside. This user’s quick reference provides the I/O outlets description and their pin
assignment.
2. Dimensions (in mm) and Front/Rear Panel Information
203
145
(REF)
14
8(REF
)
55
3.5
DC12~24V
DIGITAL I/O
ON
OFF
-
+
CTL
TV
PCMCIA
POWER DC IN 12~24V SWITCH RESET
CRT
PCMCIA
DIGITAL I/O
COM
LAN
USB
TV
POWER
HDD
LAN
STANDBY
3. Packing
List
1 FX5505x embedded system.
1 44-pin flat cable and 4 screws for fixing and connecting a 2.5" hard disk drive.
1 3-pin pluggable terminal block (0.2” pitch) for power and car ignition signal inputs.
1 10-pin pluggable terminal block (0.15” pitch) for I/O signal inputs.
1 compact disc includes software utilities and manuals.
4. Features
* Processor
Board
Intel low power Celeron-M 600MHz processor (FX5505) with 512MB DDR RAM.
* I/O
Outlets
One 10/100 base-TX Ethernet, 1 VGA (CRT), and 1 TV-out connectors.
4 USB ports (V2.0) and 1 RS-232 serial port.
1 Audio line-in, 1 Audio line-out, and 1 Microphone connectors.
1 PCMCIA socket for card bus I/O modules, especially for WLAN/GSM/GPRS modules.
1 3-pin terminal block for power and 1 10-pin terminal block for I/O signals
1 push button power switch and 1 push button reset switch.
1 power LED, 1 standby LED, 1 HDD/CF access LED, and 1 LAN LED.
* Storage
Bay
1 CompactFlash socket for CompactFlash modules or MicroDrives.
One 2.5" hard disk space.
* Power
requirement
FX5505: +12 ~ +24V DC with 15% tolerance, 28VA maximum with 2.5” HDD & 19V input voltage.
* Dimensions
148mm(D) x 203mm(W) x 55mm(H)
5. I/O outlets and LED Indicators
A. Power and ACC Signal Connector (
3-pin 0.2” Terminal Block
)
B. USB, Serial Port, and LAN Connectors
USB #1, #2
5
9 6
COM1 1
LAN
USB #3, #4
The right side LAN LED (orange) indicates data is accessing and the left side LAN LED (green)
indicates on-line status. (When lighted indicates on-line and off indicates off-line)
Standby
LAN
HDD PWR
LEDs on the Front Panel
+: Power
Input,
DC +12 to +24V, 15% tolerance,
FX5505: 45VA
minimum
-: Power
Ground
CTL: Car Ignition Signal Input
Terminal Block
CTL
DC12~24V
