Version 1.0
FX5406 Series User’s Quick Reference
Page 2/2
www.fabiatech.com
©2011 FabiaTech Corporation
6. Software Configuration and Driver Installation
Please refer to the driver installing documentaion in the included Compact Disc for installing what
device driver you need. If you need to change the system settings or configurations of I/O ports, Please
refer to User's Manual (also in the included Compact Disc) for details.
7. FX5406x Power Input and Mounting
8. Installing Devices into FX5406x
End of Document
Use terminal block for power input
Wall Mounting (2 pieces of metal with 4 screws)
Rack Mounting (FX5403K1 kit, Optional)
Panel Back Mounting (FX5504K1 kit, Optional)
Step 1: Open the Bottom Cover (6 screws)
CN1
SATA2 SATA1
Step 3: Installing SATA DOM (optional) on SATA 1 connector
if necessary.
Note 1: SATA 2 connector is used for internal SATA hard disk
and SATA 1 connector is used for SATA DOM or
SATA DVDROM for OS installation.
Note 2: Please refer to manual for setting JP2 to proper
position when using SATA DOM.
Step 5-1: Installing SATA HDD (4 Screws)
VESA 75/100mm
Standard
Step 4-1: Installing mini PCIe module,
SIM Card, and Antenna(s)
Step 6: Close case with reverse procedures of open the case.
Step 4-2: Installing half-size mini PCIe
module if necessary.
Step 5-2: Connecting power cable to CN1 of main
board and signal cable to SATA 2 for
SATA HDD. (As the right figure shown)
Half size mini PCIe adapter
(Optional)
JP2
Step 2: Installing CF & DDR3 Modules
