FabiaTech FX5328 User Manual Download Page 60

Page: 60 / 77

FabiaTech Corporation

Chapter 4 Software Installation

The enclosed CD diskette includes FX5328 VGA, System, Audio, and LAN driver. To
install and configure you FX5328 system, you need to perform the following steps.

Install AMD Catalyst ™ Drivers

WIN XP/7 32/64 Driver

To install the AMD T40E driver, insert the DVD ROM into the USB DVD ROM device,

and enter DRIVER>VGA>AMD_T40E>WINXP, or >WIN7.

Step 1: Close all opened applications including any live monitoring anti-virus,

firewall, remote-access, or webcam software before attempting to install the AMD

Catalyst Driver.

Step 2: When the downloaded installation file is run, a security prompt will

appear. Click Run to start the installation process.

NOTE! The Windows User Account Control (UAC) prompt may appear
asking, "Do you want to allow the following program to make changes to

this computer?" Select Yes to continue with the installation

Step 3: A Catalyst: Installation Folder window will open allowing the user to select

the folder to which the installation files will be saved. Click Install.

NOTE! AMD recommends using the default location to prevent issues that

may occur during installation from files that cannot be found, or are missing.

Step 4: The installation files will be extracted, and saved to the specified location.

Step 5: The AMD - Catalyst Install Manager window will open allowing the user to

select the preferred language. Choose the preferred language and click
Next.

Step 6: The AMD - Catalyst Install Manager will provide a choice to install or

uninstall. Choose, Install.

Step 7: The AMD - Catalyst Install Manager will provide a choice to complete an

Express or Custom installation. Choose Express, and click Next.
NOTE! AMD recommends an Express installation to ensure all files required

for the full functionality of AMD Radeon™ graphics products are installed.

Step 8: The End User License Agreement will appear. Read the End User License

Agreement and click Accept if you agree to the terms and conditions.

Summary of Contents for FX5328














































































Search results

Summary of Contents for FX5328

Reviews:

Related manuals for FX5328

Brands by name

Popular brands

FabiaTech FX5328, User Manual

Search results

Summary of Contents for FX5328

Reviews:

Related manuals for FX5328

Brands by name

Popular brands