FabiaTech FB2710 User Manual Download Page 68

Page: 68 / 85

FabiaTech Corporation

Step 9: The AMD - Catalyst Install Manager will analyze the system, and install the

required files.

Step10: The AMD - Catalyst Install Manager will confirm when the installation is

complete. Click Finish.

Step11: When prompted, Click Yes to restart the system and complete the

installation process.

NOTE! A system restart is required to complete the installation process.

Note: To install the Windows XP System driver, enter DRIVER>SysChip>A55E

Audio Driver

WIN

WIN X

XP/7 X86/X64 Driver

Step 1: To install the AUDIO driver, insert the CD ROM into the CD ROM device, and

enter DRIVER>AUDIO>ALC888_R270>Windows.

Step 2: Execute Setup.exe file.

Step 3: The screen shows the SETUP type. Press any key to enter the main menu.

Step 4: As the setup is completed, the system will generate the message as follows.

Yes, I want to restart my computer now. Installation is done!
No, I will restart my computer later.
System must be restart then complete the installation.

LAN Driver (RTL 8111F)

P/7 Driver X86/X64 Driver

Step 1: To install the LAN driver, insert the CD ROM into the CD ROM device, and

enter DRIVER>LAN>RTL8111F>WIN7 or >WINXP.

Step 2: Execute setup.exe file.

Summary of Contents for FB2710






















































































Search results

Summary of Contents for FB2710

Reviews:

Brands by name

Popular brands

FabiaTech FB2710, User Manual

Search results

Summary of Contents for FB2710

Reviews:

Brands by name

Popular brands