manualshive.com logo in svg

FabiaTech Fanless FX5613, User Manual

Share
Download
FabiaTech Fanless FX5613 User Manual Download Page 36

FabIATech Corporation 

30 

 

IDE Primary/Secondary Master/Slave UMDA 

Ultra DMA/33 implementation is possible only if your IDE hard drive supports it and the 
operating environment includes a DMA driver (Windows 95 OSR2 or a third-party 
IDE bus master driver). If you hard drive and your system software both support Ultra 
DMA/33, select Auto to enable This option allows your hard disk controller to use the 
fast block mode to transfer data to and from your hard disk drive (HDD).   

 

IDE HDD Block Mode 

This option allows your hard disk controller to use the fast block mode to transfer 
data to and from your hard disk drive (HDD).   

 

VIA PCI Device 

 

VIA-3058AC’97 Audio 

This field specifies the internal Audio Control. 

Available Options: Disable, Enable 

Default setting: Enable 

 

OnChip USB/EHCI Controller 

Select Enable if a USB device is installed to the system.  If Disabled are selected, the 
system will not be able to use a USB device. 

Available Options: Disabled, Enabled 

Default setting: Enabled 

 

Onboard LAN Boot ROM  

This field specifies the PXE 

boot ROM of the onboard LAN chip. 

 

Available Options: Disabled, Enable 

Default setting: Disable 

 

LAN1/2 Chipset Controller  

This field specifies the Enable or Disable 

of the onboard LAN chip. 

 

Available Options: Disabled, Enable 

Default setting: Enable 

 

 

Summary of Contents for Fanless FX5613






























































Reviews:

No comments

Brands by name

Popular brands

Load more brands