FabiaTech Fanless FX5320 User Manual Download | Manualshive

Page: 51 / 69

background image

FabiaTech Corporation

46

VGA Driver

WIN 2000/XP Driver

Step 1: To install the VGA driver, insert the CD ROM into the CD ROM device, and

enter DRIVER>VGA>945GSE>WIN2K_XP.

Step 2: Execute SETUP.EXE file.

Step 3: The screen shows the SETUP type. Press any key to enter the main menu.
Step 4: As the setup is completed, the system will generate the message as follows.

Yes, I want to restart my computer now. Installation is done!
No, I will restart my computer later.
System must be restart then complete the installation.

Step 5: In the WINDOWS2000/XP, you can find the <DISPLAYL> icon located in the

{CONTROL PANEL} group.

Step 6: Adjust the <Refresh Rate>, <Font size> and <Resolution>.

Audio Driver

WIN 2000/XP Driver

Step 1: To install the AUDIO driver, insert the CD ROM into the CD ROM device, and

enter DRIVER>AUDIO>ALC888>WIN2K&XP.

Step 2:  Execute SETUP.exe file.
Step 3:  The screen shows the SETUP type. Press any key to enter the main menu.
Step 4:  As the setup is completed, the system will generate the message as follows.

Yes, I want to restart my computer now. Installation is done!
No, I will restart my computer later.

System must be restart then complete the installation.

Note: In the DRIVER> VGA>945GSE>WIN2K_XP directory, a Readme.txt file is

included to provide installation information.

Note: In the DRIVER>AUDIO>ALC888> WIN2K&XP directory, a Readme.txt file is

included to provide installation information.

«
...
49
50
51
52
53
...
»

Summary of Contents for Fanless FX5320






































































Reviews:

No comments

Related manuals for Fanless FX5320

Brand: fadini Pages: 20

BOBCAT 130 Series

Brand: Balcrank Pages: 12

Brand: 3nStar Pages: 14

Brand: Warner Electric Pages: 14

Brand: Rohm Pages: 17

Brand: Laguna Tools Pages: 48

Brand: Lavorwash Pages: 26

Brand: Cleveland Pages: 16

Brand: Swagelok Pages: 12

Power Xpert IGX

Brand: Eaton Pages: 38

Brand: Spirax Sarco Pages: 52

Z33-M060.51 K0,15 S15

Brand: Jäger Pages: 36

Brand: Delta Electronics Pages: 11

Brand: Angelus Pages: 81

Brand: Quincy Pages: 78

Brand: Kval Pages: 144

Brand: Advantech-DLoG Pages: 56

Brand: Compax Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands