FabiaTech Fanless FX5202, User Manual

Page: 29 / 65

FabiaTech Corporation
Default setting: Enable
¾
First /Second /Third/Boot Other Device/ Boot Device
This field specifies which device the system looks first upon power on.
Available options: LS120, Hard Disk, ZIP100, USB-ZIP, USB-CDROM, USB-HDD, LAN and
Disable
Default setting: Hard Disk, CDROM, LAN
¾
Boot Up Numlock status
This field is used to activate the Num Lock function upon system boot. If the setting
is on, after a boot, the Num Lock light is lit, and user can use the number key.
Available options: On, Off
Default setting: On
¾
Gate A20 Option
This item is chosen as <Normal>, the A20 signal is controlled by keyboard controller
or chipset hardware. The selection is “Fast” Port 92 or a chipset specific method
controls means the A20 signal
Available options: Normal, Fast
Default setting: Normal
¾
Typematic rate Setting
This function specifies the keystroke repeat rate when a key is pressed and held
down.
Available options: Disable, Enable
Default setting: Disable
‹
Typematic Rate (Chars/Sec)
Typematic Rate sets the rate at which characters on the screen repeat when a key
is pressed and held down.
Available options: 6, 8, 10, 12, 15, 20, 24, or 30 characters per second
Default setting: 6
22