Faber Symax, User Manual

Page: 6 / 12

User manual Symax
5 < < < <
Time setting

Press the and key
simultaneously, the day
indication will blink. Press the
or to set the number of
the day. (1=Monday, 2=
Tuesday, etc.).

Press the and key
simultaneously, the hour
indication will blink now.
Press the or key to set
the hour.

Press the and key simultaneously,
the minute indication will blink. Press the
or to set the minutes.

To confirm, press the and key
simultaneously.
Pairing remote control with receiver
Press the “reset” button of the receiver with a
pointed object (fig. 1.3-H), until the second signal is
audible. Now press the key on the remote
control within 20 seconds and “CONN” will be
displayed and after the count up, 1 to 8, the pairing
will be confirmed by 2 beeps.
Childproof lock

To activate the childproof lock
press the and key
simultaneously until
is
displayed. The remote control
can’t be served anymore,
except the OFF-function.

To deactivate the childproof
lock, press the and key
simultaneously until
disappears.
One or two key ignition operation
The ignition can operate by setting a one or two
key operation. Standard is one key operation.

To set this; immediately press the key
for 10 seconds after placing the batteries
and wait until 1 or 2 flashes.

Release the key when the desired number
of flashes appear.
Basic functions
Switching ON
One key operation
Press the key until two short
beeps and blinking series of lines
appears. The fire automatically
starts on high setting.
(Fires equipped with a step
burner, will start in the last
setting when the fire was
switched off).
Two key operation
Press and key
simultaneously until two short
beeps and a blinking series of
lines appears. The fire
automatically starts on high
setting. (Fires equipped with a
step burner, will start in the last
setting when the fire was
switched off).
Switching OFF
Press the key and the fire will
be switched of completely. “OFF”
will flash in the display until a re-
ignition is possible.
Adjusting the flame height

Keep the key pressed to
decrease the flame height
step by step or to switch back
to the pilot flame.

Press the key twice quickly
to move to the lowest
position. (“LO” appears in the
display screen).

Keep the key pressed to
increase the flame height step
by step.

Press the key twice quickly
to move to the highest
position. (“HI” appears in the
display screen).